HP 2500C/C+/CM Professional Series Color Printer - (English) User's Guide
Table Of Contents
- Contents
- Printer Basics
- Step 1 - Unpack the Printer
- Step 2 - Remove All Tapes from the Printer
- Step 3 - Connect Cables
- Step 4 - Set LCD Language Preference
- Step 5 - Install Ink Cartridges
- Step 6 - Install Printheads
- Step 7 - Load Paper in Tray 2
- Step 8 - Load Paper in Tray 3
- Step 9 - Align Printheads
- Step 10 - Install the Printer Software
- Basic Printing Tasks
- Maintaining the Printer
- Installing the PostScript Module
- Installing Additional Memory
- LCD Messages
- Troubleshooting
- Understanding the Diagnostic Test
- Customer Support
- HP Supplies and Accessories
- Printer Specifications
- Minimum Printing Margins
- Hewlett-Packard Limited Warranty Statement
- Declaration of Conformity
- Regulatory Notices
4
1. Check that the following items are included with the printer:
a. Power Cord
b. Four HP No. 10 Ink Cartridges
(black, cyan, magenta and yellow)
c. Four HP No. 10 Printheads
(black, cyan, magenta and yellow)
d. Extended Tray Cover
e. Setup Poster
f. Getting Started Guide
g. Quick Reference Guide
h. Starter CD
i. HP JetDirect CD (HP 2500CM printer only)
j. PCL 5Ce CD (standard with HP 2500C+, and for Europe only,
standard with HP 2500C/CM)
2. Prepare printer location.
The location requirements for the printer are:
• A sturdy, level surface for placement
• Space allowance around the printer
• A well ventilated room
• No exposure to direct sunlight or chemicals, including ammonia
based cleaning solutions
• Adequate power supply
• A stable environment – no abrupt temperature or humidity changes
• Relative humidity 20% to 80%
• Room temperature 59
o
to 95
o
F (15
o
to 35
o
C)
2500C/C+/CM
HP
Step 1 - Unpack the Printer
a
b
c
d
g
f
h, i, j
e
745 mm
685 mm
532 mm
337 mm