HP 39gs_40gs_Mastering The Graphing Calculator_English_E_F2224-90010

The NUM SETUP view offers more useful features. Change to that view
now and change the
NumStep value to 10. If you then swap back to
the
NUM view you will see (as right) that the sequence jumps in steps of
10. In case you don’t realize…
2.1475E9 is ‘computer speak’ for
2 1475 10
9
. ×
Now go back to the
NUM SETUP view and change the Automatic
setting to Build Your Own by moving the highlight to it and pressing the
+ key or by using
. Switch back to the NUM view and enter the
values
1, 10, 50 and 100 into the N column.
You will find that the values for those terms of each sequence will appear
in the
U1 and U2 columns almost immediately. In case you didn’t realize,
the reason for the larger text is that the
button has been pressed.
Due to the type of problems one is usually trying to solve with sequences,
the
NUM view rather than the PLOT view is often more useful in this
aplet, but let's have a look at the
PLOT view anyway. Two types of
plots are available, the default being Stairstep.
Change to the
PLOT SETUP view and ensure that the setup view is the
same as that shown in the two screens above right. Then change to the
PLOT view and you should see a graph similar to the one shown below
right. The second type of graph is the Cobweb.
101