HP 3PAR Recovery Manager 4.5.0 for Oracle on Solaris, Red Hat Linux, and Oracle Enterprise Linux User's Guide (QL226-97705, May 2014)

MESSAGE ID
1133
SYMBOLIC NAME
RMO_ERROR_CREATE_GROUPSV
MESSAGE
3PAR1133: ERROR: Could not create group of snapshot volumes.
REASON
Recovery Manager for Oracle calls HP 3PAR CLI command creategroupsv to create a Virtual
Copy for a group of volumes failed.
SOLUTION
Check the log file to see more details. Check the HP 3PAR StoreServ Storage system to see if there
is enough space for Virtual Copy creation. Make sure all parameters from the configuration file
are up to date. Contact customer support for further investigation.
MESSAGE ID
1134
SYMBOLIC NAME
RMO_ERROR_LUN_NOTAVAIL
MESSAGE
3PAR1134: ERROR: Could not find available LUN from host <name>.
REASON
Failed to find next available VLUN number to create a VLUN. The HP 3PAR CLI command
createvlun will fail if the error is not corrected.
SOLUTION
Check if the LUN being used exceeds the maximum value. If necessary, delete some unused VLUNs
to make the VLUN available.
MESSAGE ID
1135
SYMBOLIC NAME
RMO_ERROR_CONFIG_PARAM_NOTFOUND
MESSAGE
3PAR1135: ERROR: Parameter value not found from the configuration file.
REASON
An expected parameter does not exist in the configuration file.
SOLUTION
Run rmora_config or the GUI application to update the configuration. If problem persists, contact
customer support for further investigation.
MESSAGE ID
1136
SYMBOLIC NAME
RMO_ERROR_INFORM_VERSION
MESSAGE
3PAR1136: ERROR: Could not retrieve the HP 3PAR OS release version.
REASON
180 Troubleshooting