HP 3PAR Recovery Manager 4.5.0 for Oracle on Solaris, Red Hat Linux, and Oracle Enterprise Linux User's Guide (QL226-97705, May 2014)

REASON
In Linux, Recovery Manager for Oracle failed to bind a raw device in file
/etc/sysconfig/rawdevices.
SOLUTION
Check the log file. Contact customer support for further investigation.
MESSAGE ID
1153
SYMBOLIC NAME
RMO_ERROR_UNKNOWN_VCTYPE
MESSAGE
3PAR1153: ERROR: Unknown Virtual Copy's type '<type>.
REASON
When using NetBackup to backup a Virtual Copy, Recovery Manager for Oracle could not decide
the Virtual Copy type, which is in the file vc_info in timestamp repository.
SOLUTION
Either the vc_info file is corrupted, or the Virtual Copy is created with errors. Recreate the Virtual
Copy.
MESSAGE ID
1156
SYMBOLIC NAME
RMO_ERROR_VLUN_LOCK
MESSAGE
3PAR1156: ERROR: Could not obtain lock for creating VLUN.
REASON
When Recovery Manager for Oracle tries to execute the command createvlun, it has to make
sure there is no other identical operation going on to take the next available LUN away. This is
an exclusive operation. The lock file is in /etc/3par/solutions/lock/.vlun.
SOLUTION
Make sure there is no other createvlun process running. If the lock file is not cleaned up by
previous failed operation, manually remove it.
MESSAGE ID
1157
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_ROLLBACK_TASK
MESSAGE
3PAR1157: ERROR: Could not retrieve rollback tasks information from the HP 3PAR StoreServ
Storage system.
REASON
After Recovery Manager for Oracle issues the command to rollback a Virtual Copy to its base
volumes, it keeps checking the completed tasks to make sure that the rollback operation is finished.
In this process, the HP 3PAR CLI command showtask is used to trace the task promote_sv status.
This error occurs when there is no promote_sv task.
SOLUTION
Make sure the HP 3PAR StoreServ Storage system is working properly. Contact customer support
for further investigation.
185