HP 3PAR Recovery Manager 4.5.0 for Oracle on Solaris, Red Hat Linux, and Oracle Enterprise Linux User's Guide (QL226-97705, May 2014)

RMO_ERROR_SYNCRCOPY
MESSAGE
3PAR1170: ERROR: Could not perform synchronization for RC group <Remote Copy group name>.
REASON
Synchronization for the specified Remote Copy group failed.
SOLUTION
Check the log file to see the error message. Make sure the Remote Copy group is configured
properly and make sure the Remote Copy group contains the correct volumes.
MESSAGE ID
1172
SYMBOLIC NAME
RMO_ERROR_MAXVC_EXCEED
MESSAGE
3PAR1172: ERROR: The maximum number of Virtual Copy must be between 1 and 500 (inclusive).
REASON
During configuration, the provided maximum number of Virtual Copies cannot exceed the system
allowed number, which is now 500.
SOLUTION
Specify a number between 1 and 500 (inclusive).
MESSAGE ID
1173
SYMBOLIC NAME
RMO_ERROR_SET_PROTECTION_MODE
MESSAGE
3PAR1173: ERROR: Could not set the database protection mode to maximum performance.
REASON
After using the binary control file to clone a database, trying to set the protection mode to the
default maximum performance failed.
SOLUTION
Check the alert.log for detailed information.
MESSAGE ID
1174
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_EQUIVALENT_FPATH
MESSAGE
3PAR1174: ERROR: Could not retrieve the equivalent file path for <name> on the backup server.
REASON
During the process of rmora_createdb, if the ascii control file is chosen to clone the database,
Recovery Manager for Oracle needs to modify the ascii control file saved in the repository and
then replace the datafiles with the correct physical locations on the backup server, if the files are
on file systems. If Recovery Manager for Oracle failed to retrieve the corresponding datafiles on
the backup server, the error occurs.
SOLUTION
189