HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

Table 62 Update-StoreServ parameters (continued)
DescriptionOptional/RequiredParameter
The password of the Remote RMH
Server.
Optional-RemoteRmhServerPassword
All the common parameters across the
commands.
OptionalCommonParameters
Save-Repository
The following parameters explain how to save to a repository.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Save-Repository -RmhServerName <string> -ToPath <string> [-ToMachine
<string>] [-MachineUsername <string>] [-MachinePassword
<string>][-MachineEncryptedPassword <string>][-Force] [<Common
Parameters>]
Table 63 Save-Repository parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address
Required-RmhServerName
The path in the computer where it has
to be saved.
Required-ToPath
The name of the computer where it has
to be saved.
Optional-ToMachine
The destination machine user name.Optional-MachineUsername
The destination machine password.Optional-MachinePassword
Use this command to save the file
forcefully.
Optional-Force
All the common parameters across the
commands.
OptionalCommonParameters
NOTE: To save the repository to a local drive the command is Save-Repository
-RmhServerName <string> -ToPath <string>.
100 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands