HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

Table 28 Get-VirtualMachine parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Select Hyper-V host/cluster to use. This
is FQDN or IP address. Synonyms for
Required-HypervName
Hyper-V are supported. The
localhost is not supported.
Displays progress messages.Optional-Verbose
The command returns multiple RMHirtualMachineInfo objects.
Show-Connection
Show-Connection displays connection information for current login RMH user name, all RMH
Hyper-V hosts/clusters, and all Hyper-V Storage Systems associated with the user. The actively
selected Hyper-V will also be shown.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters are enclosed in square brackets [ ] around them.
Show-Connection -RmhServerName <RmhServerName> [-HypervName]
[-ShowMissingStoreServs] [-Verbose]
Table 29 Show-Connection parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Optionally select Hyper-V host/cluster
to use. This is FQDN or IP address.
Optional-HypervName
Synonyms for Hyper-V are supported.
The localhost is not supported.
If specified, StoreServs used by
Hyper-V(s), but missing credentials, are
shown.
Optional-ShowMissingStoreServs
Displays progress messages.Optional-Verbose
Working with Virtual Copies
This section describes the command usage and parameters for working with Virtual Copies.
Create-vCopy
The create-vCopy Cmdlet creates a new Virtual Copy of a VM and includes the following
supported parameters.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters are enclosed in square brackets [ ] around them.
60 Using PowerShell Snap-in Command Line Interface