HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

• Scenario 7: VM(s) are not running.
VM(s) that are to be backed up must be running.
• Scenario 8: License is missing for RMH.
License is missing for RMH.
• Scenario 9: License is missing for Storage System Virtual Copy.
License is missing for Storage System Virtual Copy.
• Scenario 10: VHD(s) are not on NTFS volumes.
VHDs need to reside on NTFS volumes.
• Scenario 11: VSS is not operational.
VSS is not operational or not installed.
• Scenario 12: VSS requestor fails.
VSS requestor fails during backup. Reason is displayed.
• Scenario 13: Multiple Storage Systems is not supported.
RMH does not support multiple Storage Systems for VM.
Get-ClusterNodeNames
Get-ClusterNodeNames retrieves node names for the Hyper-V cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-ClusterNodeNames -RmhServerName <RmhServerName> -HypervName
<HypervName> [-Verbose]
Table 42 Get-ClusterNodeNames parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Select Hyper-V host/cluster to use. This
is FQDN or IP address. Synonyms for
Required-HypervName
Hyper-V are supported. The
localhost is not supported.
Displays progress messages.Optional-Verbose
Result with Description
• List of node names.
List of Hyper-V node names for cluster. Empty list if Hyper-V specified is not a cluster.
Success Paths
• Scenario 1: Hyper-V cluster node names are fetched.
At least one Hyper-V cluster node name is returned.
• Scenario 2: Hyper-V specified is not a cluster.
Successful without Hyper-V cluster node names returned.
Get-ClusterNodeNames 79