HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

• Scenario 6: Storage System fails to export Virtual Volume.
Storage System fails to export Virtual Volume on requested host. Reason is displayed.
• Scenario 7: Assign mount points on Hyper-V host fails.
An attempt to assign mount points for Virtual Volumes fails on host.
• Scenario 8: Only one Virtual Copy may be mounted at a time
Filtering of Virtual Copies using –VcNameUuid/-VmNameUuid does not result in only one
Virtual Copy to mount.
Remove-HyperV
Remove-HyperV removes Microsoft Hyper-V host/cluster credentials associated with a RMH user.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Remove-HyperV -RmhServerName <RmhServerName> [-HypervName] [-Verbose]
Table 51 Remove-HyperV parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Optionally select Hyper-V host/cluster
to use. This is FQDN or IP address.
Optional-HypervName
Synonyms for Hyper-V are supported.
The localhost is not supported.
Displays progress messages.Optional-Verbose
Success Paths
• Scenario 1: Remove is successful.
Remove is successful.
Failure Paths
• Scenario 1: Session owner is invalid.
Session command received on RMH Server is validated to originate from the same IP address
that initiated the session. If IP does not match, the command fails.
• Scenario 2: Session is not available.
Session specified is not available for logout. This means the session has been previously closed
by logout or timeout from RMH Server.
• Scenario 3: Not previously added.
Hyper-V is not previously added.
Remove-RmhPolicy
Remove-RmhPolicy removes RMH policy of a Virtual Machine.
88 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands