HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

Table 54 Remove-vCopy parameters (continued)
DescriptionOptional/RequiredParameter
Select name/uuid to filter VC selection
by VM.
Required-VmNameUuid
Specify timestamp of VC to locate in
the format mmddyyhhmmss.
Optional-Timestamp
Bypass confirmation prompt.Optional-Force
Displays progress messages.Optional-Verbose
Success Paths
• Scenario 1: Specified Virtual Copy is removed.
Specified Virtual Copy is removed.
Failure Paths
• Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
• Scenario 2: Storage System session credentials are not provided.
Storage System session credentials are not provided for this command.
• Scenario 3: License is missing for RMH.
License is missing for RMH.
• Scenario 4: Virtual Volume(s) is mounted.
Virtual Copies cannot be removed while mounted.
• Scenario 5: RW Virtual Volume(s) is missing.
Message is displayed. Remove operation continues.
• Scenario 6: Virtual Volume(s) in use by other Virtual Copy records.
Unable to delete. In Use by other Virtual Copies. Remove operation continues and leaves
Virtual Volume alone.
• Scenario 7: Unable to delete RW Virtual Volume.
Unable to delete RW Virtual Volume. Remove operation continues.
• Scenario 8: License is missing for RMH.
Unable to delete RW Virtual Volume. Remove operation continues.
• Scenario 9: Only one Virtual Copy can be removed at a time.
Filtering of Virtual Copies using -VcNameUuid/-VmNameUuid does not result in only one
Virtual Copy to remove.
• Scenario 10: Virtual Copy is not removed.
If Storage System reports error other than virtual volume not found, the Virtual Copy is retained.
Remove-RemoteStoreServ
Remove-RemoteStoreServ removes HP 3PAR StoreServ credentials already present in RMH
database for user.
Remove-RemoteStoreServ 91