HP 3PAR Recovery Manager 2.0 Software for Microsoft Hyper-V User Guide (QL226-97701, May 2014)

Table 59 Unmount-vCopy parameters (continued)
DescriptionOptional/RequiredParameter
Select VC by name/uuid.Required-VcNameUuid
Select name/uuid to filter VC selection
by Virtual Machine.
Required-VmNameUuid
Specify timestamp of VC to locate in
the format mmddyyhhmmss.
Optional-Timestamp
Specifies the virtual hard disk name,
virtual volume name, or virtual volume
Optional-Select
WWN in a comma-separated list. For
virtual hard disk name, this is the full
filename with path, or just a partial
name. Wildcards are not allowed. By
default, RMH will unmount all Virtual
Copy volumes in a VCS.
Hyper-V host name. Use this option to
specify host node in cluster. You may
Optional-HypervHostName
also use this option in a non-cluster
environment. If not specified, host name
of the RMH Server is used
fromLogin-Rmh.
Displays progress messages.Optional-Verbose
Result with Description
• RmhMountVirtualCopySetResult
The command returns RmhMountVirtualCopySetResult objects and contains:
◦ RMHVirtualCopySet with current state updated.
◦ Information on name, WWN, partition, volume guid path, and mount point of each Virtual
Volume mounted.
Success Paths
• Scenario 1: Unmount is unsuccessful.
Requested unmounts of Virtual Volume(s) is successful.
Failure Paths
• Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
• Scenario 2: Storage System session credentials are not provided.
Storage System session credentials are not provided for this command.
• Scenario 3: License missing for RMH.
License is missing for RMH.
• Scenario 4: One or more Virtual Volumes mount points do not exist.
Using a specified mount point prefix and RMH format of RMH.vv-wwn, the mount point
attempted is not available to unmount.
• Scenario 5: Storage System host is not available to unmount Virtual Volume(s).
A Storage System host must be available to unmount Virtual Volume(s).
96 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands