HP 3PAR OS 3.1.2 MU5 Upgrade Instructions

16:45.05 Checking health of pdch
16:45.06 Checking health of port
16:45.14 Checking health of rc
16:45.14 Checking health of snmp
16:45.15 Checking health of sp
16:45.15 Checking health of task
16:45.16 Checking health of vlun
16:45.16 Checking health of vv
4. After the health check completes gathering the data, the SP displays a list of files to view.
4.4.2 Show latest health check status from InServ
Available files
1 ==> /sp/prod/data/files/1300338/status/110420.101029.all
2 ==> /sp/prod/data/files/1300338/status/110420.101029.det
3 ==> /sp/prod/data/files/1300338/status/110420.101029.err
4 ==> /sp/prod/data/files/1300338/status/110420.101029.sum
0 ==> Abort Operation
Please select a file to display
To view the available files, type the corresponding number and then press Enter to continue.
Select the number corresponding to the data file with the .all extension and press Enter.
After the file is reviewed, press Enter to continue, and then select option 0 to exit health check.
NOTE: The SPMAINT utility uses the more command to view files. Press the spacebar to
move to the next page. After viewing the contents of the file, to exit press Enter. Then select
0 (Abort Operation) to return to the previous menu. After you return to the previous
menu, the report is discarded. To view the health status again, run the health check again.
5. Review and correct any exceptions before performing an HP 3PAR OS update.
Performing Validation Routines
WARNING! In case of a failure of any test, it must be escalated to HP 3PAR Authorized Support
Provider so that issues, if any, may be corrected before the HP 3PAR OS update. Failure to resolve
an issue before the software update may cause unpredictable results.
To perform validation routines:
1. From the SPMAINT main menu, check the status of the system on which validation routines
are to be performed. To check the status of the system, enter: =4.7.1 on the SPMAINT main
menu and press Enter.
4.7.1 InServ Upgrade Status
Configured InServs
1 ==> s227 --> 1200227
0 ==> Abort Operation
Please select a InServ to operate on
Performing Validation Routines 19