HP 3PAR InForm OS 2.3.1 MU4 Patch 25 Release Notes

These release notes describe the modifications and known issues for Patch 25. The application of this
patch is intended for HP 3PAR InForm OS 2.3.1.330. Only an authorized HP Service provider should
perform this maintenance procedure.
1.1 Supported platforms
The HP 3PAR Configuration Matrix for InForm OS 2.3.1 contains information about supported hardware
and software platforms. For additional information, go to the Single Point of Connectivity Knowledge
for HP Storage Products (SPOCK) Web site at http://spock.corp.hp.com/index.aspx.
1.2 Verifying the patch installation
The installation of Patch 25 can be verified from an Interactive CLI session. Issue the CLI command
showversion -a -b to verify that Patch 25 is listed.
cli% showversion -a -b
Release version 2.3.1.330
Patches: P25
Component Name Version
CLI Server 2.3.1.330
CLI Client 2.3.1.330
System Manager 2.3.1.330
...
NOTE: This patch is not revertible after installation.
1.3 Components
VersionComponent
3P01HMRSK0002TBAT07K 2TB Drive Firmware
3P01SMSKP0001TBAT07K 1TB Drive Firmware
3P01SMSKP0002TBAT07K 2TB Drive Firmware
4.44DC2 Firmware
08DC3 Firmware
2.61DC4 Firmware
1.4 Modifications to the InForm OS
The following items have been addressed in this release.
DescriptionItemBug ID
Found error in serial port where characters were looped back to the serial
port which sometimes could cause timeout results in a cage reset and becomes
Cage failed and became
inaccessible after reset
56585
inaccessible. The fix prevents any characters to come back to the serial port,
also additional checks are put in place to prevent the cage from becoming
inaccessible.
Firmware support for HMRSK0002TBAT07K (2TB) drives.Initial release of new drive
firmware
65371
Firmware support for SMSKP0001TBAT07K (1TB) and SMSKP0002TBAT07K
(2TB) drives.
Initial release of new drive
firmware
65372
1.1 Supported platforms 3