HP 3PAR InForm OS Common Criteria Administrator's Reference (QL226-96586, October 2012)

Documentation Errata 32
F-Class Installation/Deinstallation Guide
This section indicates that there are three supported topologies – shared, split, and
private. This is incorrect – only shared and private are supported.
Supported Network Topologies (p. 11)
Split network topology is not supported. This entire section should be ignored.
Split Network Topology (p. 12)
At the end of this section, the list of requirements for the private topology should be
followed by a Note that indicates private segment use disables the service processor’s call
home and remote diagnostic capabilities.
Private Network Topology (p. 12)
This section should include a Note that indicates the service processor is not part of the
evaluated configuration and refer the reader to the Common Criteria Administrator’s
Reference for more information.
Service Processor Connectivity (p. 13)
This section also includes a Note that refers the reader to the HP 3PAR Service Tools
Platform white paper, which is incorrect. The correct reference is the HP 3PAR Secure
Service Architecture white paper. A later Note in this same section (p. 14) makes
reference to the HP 3PAR Remote Security Model: A Technical Perspective. That reference
is also incorrect – the correct reference is the HP 3PAR Secure Service Architecture white
paper.
S-Class/T-Class Physical Planning Manual
This section incorrectly references the P10000 instead of the T-Class.
Common Criteria Evaluated Configuration (p. 17)
This section should include a Note that indicates the service processor is not part of the
evaluated configuration and refer the reader to the Common Criteria Administrator’s
Reference for more information.
Planning Network Access (p. 41)
This section indicates that there are three supported topologies – shared, split, and
private. This is incorrect – only shared and private are supported.
Supported Network Topologies (p. 41)