HP 3PAR RedHat and Oracle Linux Implementation Guide

Table 2 HP 3PAR Storage Products (continued)
See...Product
HP Support CenterHP 3PAR StoreServ Software — Device Management
HP Support CenterHP 3PAR StoreServ Software—Replication
HP 3PAR OS Upgrade Considerations
For information about planning an online HP 3PAR Operating System (HP 3PAR OS) upgrade, see
the HP 3PAR Operating System Upgrade Pre-Planning Guide, which is available on the HP Support
Center (SC) website:
HP Support Center
For complete details about supported host configurations and interoperability, consult the HP
SPOCK website:
HP SPOCK
Audience
This implementation guide is intended for system and storage administrators who monitor and
direct system configurations and resource allocation for the HP 3PAR StoreServ Storage.
The tasks described in this manual assume that the administrator is familiar with RHEL 4, RHEL 5,
RHEL 6, or Oracle Linux and the HP 3PAR OS.
This guide provides basic information that is required to establish communications between the
HP 3PAR StoreServ Storage and the Red Hat Enterprise Linux or Oracle Linux host and to allocate
the required storage for a given configuration. However, the appropriate HP documentation must
be consulted in conjunction with the RHEL host and host bus adapter (HBA) vendor documentation
for specific details and procedures.
NOTE: This implementation guide is not intended to reproduce or replace any third-party product
documentation. For details about devices such as hosts, HBAs, fabric switches, and non-HP 3PAR
software management tools, consult the appropriate third-party documentation.
8 Introduction