HP 3PAR RedHat and Oracle Linux Implementation Guide

Using the iSNS Server to Create a Discovery Domain
Follow these steps:
1. Click Start→Administrative Tools→iSNS Server→Discovery Domains tab.
2. In the window that appears, click the Create button.
3. In the Create Discovery Domain popup, enter the discovery domain or select the default, and
then click OK.
Configuring the iSCSI Initiator and Target for iSNS Server Usage
Configuring the HP 3PAR StoreServ Storage
Follow these steps to configure the HP 3PAR StoreServ Storage:
1. Issue the showport -iscsi command to verify whether the iSCSI target ports are configured
for the iSNS server. For example:
2. Set up the IP addresses for iSNS.
# controliscsiport isns <ISNS Server IP><HP 3PAR StoreServ Storage iSCSI port>
Example:
# controliscsiport isns 10.107.66.11 0:3:2
# controliscsiport isns 10.107.66.11 1:3:2
3. Verify the configuration setting for iSNS. For example:
Configuring the iSNS Client (RHEL Host)
Install the isns-utils package using yum.
# yum --nogpgcheck install isns-utils
Switch the service on by issuing the following command:
# chkconfig isnsd on
90 Configuring a Host with iSCSI