HP 3PAR InForm OS Common Criteria Administrator's Reference (QL226-96586, October 2012)

27 Confirming the System Configuration
5 Confirming the System Configuration
Administrators can use the information in this section to verify that the HP 3PAR Storage
System that was ordered has the correct system components and was installed and
configured as intended.
See the HP 3PAR InForm OS Command Line Reference for individual CLI command
details.
Hardware
To determine that the installed hardware matches that which was ordered for a system, the
administrator can use the showinventory CLI command. This lists all installed hardware
components, with serial number and model number if available. This information can then
be compared to the ordered configuration, based on sales invoices, to be certain that the
hardware is correct. Also, following a maintenance procedure that replaces parts, the
command can be used to produce a list to compare against a previous list to provide a
check on the parts replaced and the location of those parts.
Software
To determine if the system software ordered matches what is installed and running, the
administrator can use the showversion CLI command. This lists the version levels of all
major components of the InForm OS. To see an exhaustive list, use the showversion –a
CLI command. After performing software maintenance activities, these commands can be
used and compared against prior output to validate what components were changed.
Licensed Features
To determine what licensed features have been installed on the system, use the
showlicense CLI command.