HP 3PAR InForm OS 3.1.1 MU1 Release Notes

Modifications to the InForm OS CLI
DescriptionItemBug ID
The command functionality is new. It will display remote volumes in
showtarget but not in showpd. It will also display the SCSI inquiry and
mode page information.
showtarget commandN/A
Changed HPC limit from 1024 to 255.createvv, createtpvv,
setvv, createaldvv,
N/A
createavv, and
createtemplate
commands
When a VLUN with SCSI reservations is removed, the following warning
is issued and requires confirmation in order to proceed: Warning: The
VLUN has SCSI reservations. Are you sure you want to remove it?.
VLUN removal (removevlun
command)
35572
The CLI client will stop if the connection to the CLI server is lost. The CLI
client issues the following message if the connection is lost: cli% Server
connection broken, exiting ... Connection to s017 closed.
The CLI client stops if the
connection to the CLI server
is lost.
43690
In previous releases,showcage -sfp showed the state of an unqualified
SFP in the cage as OK instead of Degraded. This has been fixed in InForm
OS 3.1.1.
The showcage -sfp
command shows the state of
an unqualified SFP in the
46372
cage as OK; the state should
be Degraded.
An event log will be created when the showcage command is run.showcage command46741
System manager does not send raw used MB and as a result CLI processes
raw total MB causing a discrepancy between the showsys –space and
showvv –r.
Discrepancy between
showsys -space and
showvv –r
47270
A new option -lesb has been added to the showhost command to show
the CRC error for the specified host(s).
showhost command49019
showhost -lesb [<host_name>... | <pattern>... |
<host_set>...] -lesb
Shows the CRC error counts for the host/port.
Because the events are generated for vvcopy update events, it appears
to halt. This has been fixed using another event type.
The vvcopy command
appears to halt every five
seconds.
49449
The permission to run starttask is now granted to SUPER, EDIT and
SERVICE roles only. Previously, only SUPER and SERVICE could run
starttask.
starttask permission
extended to EDIT user.
51517
The Speed(K) column header has been changed to RPM. When using the
-showcol and -listcol, options, use RPM to refer to that column.
showpd, showld –p and
showpdvv commands
51621
The growvv, growavv, growaldvv and growtpvv commands will issue
a warning if the virtual volume size increases from less than 2TB to greater
than 2TB. The warning can be overridden by using the -f option.
A warning message is issued
if a virtual volume size grows
from less than 2TB to greater
than 2TB.
53468
In previous releases, the showvv -cpg command listed only the base
volumes belonging to a CPG. This has been modified in InForm OS 3.1.1
showvv -cpg enhancement53689
so that both the snapshots and the base volumes belonging to a CPG are
listed.
The backslash symbol (\) is now allowed in the user password when the
user is created or the password is changed with the setpassword.
User password requirements54862
The command showspace -hist -cpg <cpg1> now only returns the
specific CPG information from the storage system back to the client.
The showspace -hist
-cpg xxx command returns
55215
excessive information,
resulting in memory issues.
Modifications to the InForm OS CLI 27