HP 3PAR Online Import for EMC Storage Data Migration Guide

OUTPUT : 0
Success0
Not Supported1
Unknown2
Timeout3
Failed4
Invalid Parameter5
Job Queued4096
Size Not Supported4097
7. Use the dv command to verify the storage system is discovered.
NOTE: If your SMI-S Provider has Client IP Filtering enabled, you will need to add the IP Address
of the OIU server to the Trusted IP address list.
To add an OIU Server to the SMI-S Provider Trusted IP address list:
1. Login to SMI-S ECOM administration page using one of the SMI-S user and password
configured:
• https://<SMI-S IP address>:5989/ECOMConfig
• http://<SMI-S IP address>:5988/ECOMConfig
2. Select the Client IP Filtering link on the ECOM Administration page.
3. Add the OIU server IP address in the Trusted client’s IP field on the Client IP Filtering page
and click Execute to complete.
Installing the HP 3PAR Online Import Utility for EMC Storage
These steps describe the process for installing the HP 3PAR Online Import Utility (OIU) for EMC
Storage. The HP 3PAR Online Import Utility for EMC Storage software can be obtained from the
HP Software Depot using the following link:
• https://h20392.www2.hp.com/portal/swdepot/displayProductsList.do?category=3PAR
NOTE: The HP 3PAR Online Import Utility for storage is comprised for two installable
applications: The OIU client and the OIU server. Refer to the Single Point of Connectivity
Knowledge (SPOCK) website for supported target environments for the OIU server:http://
www.hp.com/storage/spock
The default directories and options are shown below:
• Default Installation Directory
◦ C:\Program Files (x86)\Hewlett-Packard\hp3paremcoiu
• Default Log File Name
◦ hp3paremc.log (under C:\Program Files
(x86)\Hewlett-Packard\hp3paremcoiu\OIUTools\tomcat\32-bit\apache-tomcat-7.0.37\logs)
• Default Port Numbers
Service Port: 2396◦
◦ Shutdown Port: 2397
Installing the HP 3PAR Online Import Utility for EMC Storage 11