HP 3PAR Online Import for EMC Storage Data Migration Guide

showconnection
DESCRIPTION
By default, the showconnection command shows a map of all connected source and destination
storage systems. There should be 1:1 mapping between source and destination storage systems
and destination and source systems for peer port FC connection. Given a source storage system,
this shows all the configured destination storage systems, it can see and vice versa. However, the
parameters, –source and –destination can not be used together.
PARAMETERS
DescriptionMandatory/OptionalParameter
Source storage system WWN (World
Wide Name).
Optionalsource
As per Online Import Utility
documentation.
Optionaldestination
EXAMPLE
showconnection -source 50067890BEE0177F
SOURCE_NAME SOURCE_UNIQUE_ID DESTINATION_NAME
DESTINATION_UNIQUE_ID DESTINATION_PEER_PORT
SOURCE_HOST_PORT
CLARiiON+APM00123457014 50067890BEE0177F 3PAR_Array_1
2FF70002DY005F92 2024-0202-DY00-5F92(0:2:4)
5006-7890-3EE0-177F(Port SP_B:0)
CLARiiON+APM00123457014 50060160BEE0177F 3PAR_Array_1
2FF70002DY005F92 2024-0202-DY00-5F92(0:2:4)
5006-7890-3EE0-177F(Port SP_A:0)
showdestination
Description
The showdestination command lists the storage systems that are already added to the Online
Import Utility to be treated as destination of migration job. It shows empty table if no destination
storage systems found.
PARAMETERS
DescriptionMandatory/optionalParameter
Friendly name of the storage
system.
Optionalname
This is storage system family
name (e.g. 3PAR).
Optionaltype
This command can be used to
print delimited output.
Optionalcsvtable
Redirects the output of the
command to a file.
Optionalfilewrite
Display all details with
headings.
Optionalall
Any argument that follows
showcols depicts field to
Optionalshowcols
66 HP 3PAR Online Import Utility for EMC Storage: Commands