3PAR InForm® OS 2.2.4 Concepts Guide (320-200085 Rev B, March 2009)

14.7
The 3PAR SNMP Agent
InForm OS Version 2.2.4 3PAR InForm OS Concepts Guide
14.4.2.2.6 System Location
Access: Read-write
MIB definition:
sysLocation
Data type: Display string (max. 255 characters)
Default value:
Please provide location description where the device
resides such as building, room, and rack number
Description: Contains the user-defined location of the system. This helps to indicate where
the storage system is located. For example, the location may be indicated as follows:
Building 1, room 4, rack 3. This value can be changed via the manager at any time.
14.4.2.3 The 3PAR MIB
The 3PAR MIB contains proprietary information that reflects the configuration and behavior of
the InServ storage system and may be useful for network management. Currently, the 3PAR
MIB only contains the alertNotify trap definition. Table 14-2 on page 14.7 summarizes the
contents of this trap.
Table 14-2. Contents of the alertNotify Trap
Object Descriptor Description Access
component
Tells you which system hardware, software, or logical
component caused the alert or alert state change.
Read-only
details
Detailed description of the alert or alert state
change, displayed as an alert string (for example:
PR
table <table_name> is corrupt
). See the
InForm OS Messages and Operator’s Guide for exact
content of all possible alert strings. See alertNotify
Traps on page 14.8 for the exact content of the alert
state change notification string.
Read-only
nodeID
Node identification number, an integer from 0
through 7 that indicates which storage server
controller node reported the alert or alert state
change.
Read-only