3PAR InForm® OS 2.2.4 Concepts Guide (320-200085 Rev B, March 2009)

14.8
The 3PAR SNMP Agent
3PAR InForm OS Concepts Guide InForm OS Version 2.2.4
14.4.2.3.1 alertNotify Traps
An alertNotify trap contains details about an event that may affect system operations and
performance. All alerts generated by the system as well as all alert status change events are
translated into alertNotify traps.
severity
Severity level of the alert or alert state change, which
is an integer from 0 to 5. See the 3PAR MIB for
definitions for each integer.
Read-only
timeOccurred
Time the alert or alert state change occurred, in
DDD mmm dd hh:mm:ss ZZZ yyyy format (for
example:
Mon, Jan 01 12:30:34 PST 2005).
Read-only
id
Alert ID. The alert ID uniquely identifies an
outstanding alert on some object within the InServ
Storage Server. Alert IDs are automatically generated
by the InForm OS and increment when a new alert on
a new object is detected. Note also that if an alert is
generated on an object and alerts already exist in the
system, the alert ID is removed. For alert state traps,
the alert ID will be the same as the ID of the trap that
indicated the original problem.
Read-only
messageCode
Code that identifies the specific type of alert or alert
state change. For example, the message code for the
alert state change is 1245186. For alerts, use the
message code in referring to the InForm OS Messages
and Operator’s Guide for instructions on prescribed
operator actions.
Read-only
state
Current alert state, which is an integer between 0
and 5. See the 3PAR MIB for definitions for each
integer. Alert states enable users to maintain detailed
tracking of alerts throughout their life cycle.
Read-only
Table 14-2. Contents of the alertNotify Trap (continued)
Object Descriptor Description Access