3PAR InForm® OS 2.2.4 Concepts Guide (320-200085 Rev B, March 2009)

14.9
The 3PAR SNMP Agent
InForm OS Version 2.2.4 3PAR InForm OS Concepts Guide
The following example shows an alertNotify trap translated from an alert:
For this and for all alerts, use the message code provided (e.g., 1703938) to refer to the InForm
OS Messages and Operator’s Guide for instructions regarding required operator actions
pertaining to the alert.
An alert status change event is not an alert. It notifies you that an alert has changed status
(e.g., from New to Resolved by System). The following example shows an alertNotify
trap
translated from an alert status change event:
sysUpTime.0:0 hours, 28 minutes, 1 seconds.
snmpTrapOID.0:.iso.org.dod.internet.private.enterprises.threepar.inserv.alertNotif
y
component.1:comp_hw_node
details.1:Node 7 is offline
nodeID.1:0
severity.1:major(2)
timeOccurred.1:Wed Dec 15 16:58:20 PST 2004
id.1:647
messageCode.1:1703938
state.1:new(1)
NOTE: If you receive a trap with messageCode == 1245186, this is to notify you
that an alert has changed state. In order to find out which alert has changed
state, you must extract the alert ID from the
id trap field.
sysUpTime.0:0 hours, 5 minutes, 26 seconds.
snmpTrapOID.0:.iso.org.dod.internet.private.enterprises.threepar.inserv.alertNotify
component.1:comp_sw_alert
details.1:Alert 647 changed from state New to Resolved by System
nodeID.1:1
severity.1:info(5)
timeOccurred.1:Thu Dec 16 14:06:36 PST 2004
id.1:647
messageCode.1:1245186
state.1:autofixed(5)