3PAR InForm® OS 2.2.4 Concepts Guide (320-200085 Rev B, March 2009)

A.5
Removing Spare Chunklets
InForm OS Version 2.2.4 3PAR InForm OS Concepts Guide
The -f option forces the removal, even if the chunklet is in use. The -p command allows
partial completion of the command, that is, spare chunklets not in use will be removed even if
some of the chunklets listed on the command line are in use and therefore cannot be removed
from the list.
The following example shows a sample
removespare command:
This command removes chunklets 3 and 4 on physical disk 1. The
-p option causes the
command to remove one unused chunklet even if the other one is in use by a logical disk.
removespare -p 1:3 1:4
NOTE: To repair physical disks with bad chunklets, you must replace the physical
disk on which the chunklet resides. This procedure must be performed under the
guidance of 3PAR service personnel.