3PAR InForm OS 2.3.1 MU2 Release Note (325-200142 Rev B, October 2010)
3.2
What’s New in the InForm CLI
3PAR InForm OS Release Notes InForm OS Version 2.3.1 MU2
3PAR Confidential
3.2 What’s New in the InForm CLI
The following CLI commands (Table 3-1) have been updated to include support for SSD. There
is no syntax change for any of these commands. Help text now shows SSD as a valid device
type.
Table 3-1. CLI Command Updates for SSD Support
CLI Command Comment
createald
■ Changed default step size to 32 K for R0, R1 and
R5 volumes created on SSD.
createaldvv
■ No syntax or other changes.
growaldvv
■ No syntax or other changes.
tunealdvv
■ Changed default step size to 32 K for R0, R1 and
R5 volumes created on SSD.
createtemplate
■ Changed default step size to 32 K for R0, R1 and
R5 volumes created on SSD.
createcpg
■ Changed default step size to 32 K for R0, R1 and
R5 volumes created on SSD.
setcpg
■ Changed default step size to 32 K for R0, R1 and
R5 volumes created on SSD.
showcpg
■ The output of showcage -sag and showcpg -
sdg
shows SSD type under the Args column if the
CPG is create with a device type of SSD.
showld
■ The column help text and output are changed to
indicate SSD device type if LDs are created with
SSD device type.
showpd
■ The column help is changed to add SSD device type
and the output is also changed to show the SSD