HP 3PAR Management Console 4.3.1 Release Notes (QL226-96859, April 2013)

1.4.4 Stop Locate Does Not Stop the Blinking LED (Bug 78560)
The Stop Locate option for a system in the Management Console does not stop the HP 3PAR StoreServ
Storage system's LED from blinking.
Workaround:
Use the Locate System option in the Management Console with a duration of 1 second.
1.4.5 Peer Motion Migration of a Physical Copy Still in Progress Will Fail (Bug 79124)
If creation of a physical copy is in progress when you attempt a Peer Motion migration, the Peer Motion
migration will fail.
Workaround:
Wait until the physical copy task has completed and try the migration again.
1.4.6 Use IE 8 or 9 or Firefox 14 or 15 to Access Management Console Online Help
(Bug 79134)
HP 3PAR Management Console Online Help is not supported in Internet Explorer 10.
Workaround:
If you are unable to use Internet Explorer 8 or 9, use Mozilla Firefox 14 or 15 to access the Online
Help.
1.4.7 Cannot Create RW Snapshots from RW Bases or Snapshots (Bug 79230)
If the virtual volumes used to create a snapshot are read/write (RW), the Management Console can
only create read-only (RO) snapshots. The Management Console does not support creating RW
snapshots from RW bases (or snapshots).
Workaround:
Use HP 3PAR OS CLI commands to create RW snapshots from RW bases or snapshots.
1.4.8 Upgrade Cage Firmware Can Cause an Exception (Bug 79294)
When you upgrade the Firmware on a cage, the Management Console might throw an exception.
Workaround:
Close the Management Console while you are upgrading a cage.
1.4.9 The Default AO Configuration Requires More than One Device Type (Bug 80297)
You can only create the default AO configuration if your storage system uses two or more device types.
If your storage system uses only one type of device (e.g., FC drives only), the default AO configuration
fails to create.
Workaround:
To create the default AO configuration, ensure your storage system uses at least two device types.
1.4.10 iSCSI Virtual Ports for iSCSI Not Yet Supported
The Management Console displays Partner and Partner WWN/IP columns, but these columns do not
yet display data for iSCSI virtual ports. Providing iSCSI virtual port support will be addressed in a
future release.
Workaround:
None.
6 1.4 Known Issues with the HP 3PAR Management Console