HP 3PAR Management Console 4.5.1 Software User Guide

The list pane of the Paths screen provides the following information:
DescriptionColumn
The host's WWN or iSCSI name.WWN/iSCSI Name
The host name. If no name is displayed, the path is unassigned. Each host name is a
link to the host Summary tab.
Host Name
The domain in which the host is located.Domain
The type of path, Fibre Channel or iSCSI.Type
The port to which the path is connected (in Node:Slot:Port format). Each port is a link
to the port summary.
Port
The IP address if an iSCSI path.iSCSI IP Address
Detail Pane
The detail pane displays detailed information about a single host path selected from the list pane
and is displayed on the following three tabs:
“VLUN Templates Tab” (page 109)
“Active VLUNs Tab” (page 110)
“Path Summary Tab” (page 111)
VLUN Templates Tab
The following information is provided on the VLUN Templates tab:
DescriptionColumn
The exported LUN value.LUN
The domain in which the VLUN belongs.Domain
The exported volume.Virtual Volume
The volume's RAID type.RAID Type
The name of the host to which the VLUN is exported.Host
The port to which the path is connected (in Node:Slot:Port format).Port
Viewing Paths 109