HP 3PAR Management Console 4.5.1 Software User Guide

value for when you want the source and backup groups to synchronize their data. If not
selected, no period is used.
d. (Optional) Start group after completion - Select if you want the Remote Copy group to
start mirroring after it is created.
e. (Optional) Perform initial sync - Select if you want the created Remote Copy group to be
synchronized with its backup group. If both sides are not synchronized, it could lead to
data inconsistency. (This option is available if Show tape backup options in Remote Copy
wizards was selected in the Preferences.)
f. (Optional) Auto Recover - Select if you want the group to be restarted automatically after
Remote Copy links come back up should the links go down. (Displayed only if Show
advanced options is selected.)
g. (Optional) Over Period Alert - Select if you want an alert to be generated if the
synchronization of a periodic group takes longer than its set synchronization period. This
option is not available for groups in synchronous mode. (Displayed only if Show advanced
options is selected.)
3. Click Next to configure Virtual Volumes or click Finish.
Virtual Volumes
1. In the Source volume on list, select a source virtual volume from the virtual volume list.
2. In the Backup Volume on list, select a backup virtual volume from the virtual volume list, or
click New to create a new backup volume.
3. If you clicked New:
a. Enter a volume name.
b. Select CPG for the user space.
c. Select a CPG for the copy space.
NOTE: When selecting volumes, you can filter the lists by clicking the down arrow and then
selecting Virtual Volumes, Provisioning, and Virtual Size. To clear the filter, click Clear.
4. Click Add.
5. Click Next.
NOTE: If an RW snapshot is added to the group, all RW of the same volume family are removed.
The base parent is also removed.
NOTE: If you are creating a Remote Copy group for a Synchronous Long Distance (SLD) Remote
Copy configuration, repeat steps 2 and 3 for the second Backup Volume on list of virtual volumes.
Summary
Review the summary information, then click Finish.
Adding a Virtual Volume to a Remote Copy Group
NOTE: HP 3PAR Remote Copy Software requires an HP 3PAR Remote Copy Software license.
For more information about the license, see the HP 3PAR OS Concepts Guide.
To add a virtual volume to a Remote Copy group:
1. Navigate to the Virtual Volumes screen.
2. Select the volume(s) you want to add to a Remote Copy group.
3. Right-click the selection.
4. In the menu list, select Add to Remote Copy Group.
The Add Volumes to Remote Group dialog box appears.
Adding a Virtual Volume to a Remote Copy Group 149