HP 3PAR Management Console 4.5.1 Software User Guide

RC Ports Tab
The list pane of the RC Ports tab displays summary information about the system's Remote Copy
ports. The detail pane displays details about a selected port from the list pane.
The following information is displayed in the list pane:
DescriptionColumn
The location of the port in Node:Slot:Port format.Position
The designated port label.Label
The WWN or MAC address of the connected device.WWN/MAC
The state of the port. See “System and Component Status Icons” (page 507).State
The type of port, either RCIP or RCFC.Type
Type of device that the port is connected to: Free, Disk, Host, Peer, RC, or InServ.Connected Device Type
Name of device that the port is connected to, for example, host1, cage0.Connected Device
Port firmware mode setting. Ports in Initiator mode are connected to drive cages and
ports in Target mode export to hosts. Suspended mode is for target ports that have not
yet been initialized by the system (rare). Peer mode is for Ethernet ports.
Mode
For information about the detail pane, see “RCIP Tab” (page 235) and “RCFC Tab” (page 236).
234 Configuring and Managing Remote Copy