HP 3PAR Management Console 4.5.1 Software User Guide

NOTE:
• Copying the NTP configuration is supported only when you are configuring HP 3PAR Storage
Systems.
• Syslog parameters are copied from the source system to the destination system, but the HP
3PAR Management Console has no syslog parameters management functionality.
• The SNMP configuration is copied from the source system to the destination system, but the
HP 3PAR Management Console has no SNMP management functionality. Additionally, the
user settings are not copied.
If the simple copy operation does not meet your needs, you can modify settings and configurations
on the destination system. You can use the following existing HP 3PAR Management Console
commands:
• Create/Edit domain (createdomain/setdomain)
• Create/Edit domain set (createdomainset/setdomainset)
• Create/Edit host (createhost/sethost)
• Create/Edit host set (createhostset/sethostset)
• Create/Edit user (createuser/setuser)
• Create/Edit LDAP configuration (setauthparam)
To copy storage settings and configurations:
1. Select Peer Motion in the Manager Pane.
2. Select Peer Motion Configuration in the Management Tree.
3. In the Common Actions panel, select Copy Storage Settings and Configurations. The Copy
Storage Settings and Configurations wizard displays.
Copy Storage Settings and Configurations
This wizard allows you to copy storage settings for:
• Domains
• Domain sets
• Hosts
• Host sets
The wizard allows you to copy storage configurations for:
• Users
• Domains
• LDAP
• NTP server
• DNS server (HP 3PAR OS version 3.1.2 and higher)
• SNMP
• Syslog parameters
To copy storage settings and configurations from the source system to the destination system:
1. Select the Copy all listed storage settings checkbox.
2. Select each storage configuration you want to copy, if enabled.
3. Click Next to go to the Summary page, or click Finish to complete the wizard.
254 Using Peer Motion in HP 3PAR Management Console Manager