HP 3PAR Management Console 4.5.1 Software User Guide

The Settings tab displays the following information:
DescriptionFieldGroup
The raw space alert threshold (in GiB) for Fast Class devices.FC Raw Space AlertSystem Parameter
The raw space alert threshold (in GiB) for Near Line devices.NL Raw Space Alert
The raw space alert threshold (in GiB) for SSD devices.SSD Raw Space Alert
NOTE: The HP 3PAR Management Console displays the devices currently installed in your
system. For example, if you do not have Fast Class drives installed, the FC Raw Space Alert
field does not appear on the Settings tab.
Indicates if the copy space reclaim feature is Enabled or Disabled.Copy Space Reclaim
The set maximum volume retention time.Maximum Volume
Retention Time
The set size of the chunklet (in GiB) of the physical disk.Chunklet Size
Location of the system (if entered).LocationDescriptors
The owner of the system (if entered).Owner
Contact information (if entered).Contact
Any notes about the system (if entered).Comments
Radio buttons indicating if you want to view either IPv4 or IPv6
network configuration information. If your system is not configured
for IPv6, the IPv6 button is disabled.
IPv4/IPv6Network
Configuration
The system's IP address.IP Address
(If IPv4 was selected) The subnet mask.Subnet Mask
(If IPv6 was selected) The decimal value indicating the number of
contiguous, higher-order bits of the address that make up the network
portion of the address.
Prefix
The active system node.Active Node
Viewing System Settings 303