HP 3PAR Management Console 4.5.1 Software User Guide

3. (Optional) Select Reload Firmware if you want to reload the port firmware upon reset.
4. Click Yes.
Setting a Port Offline
NOTE: This operation cannot be performed on RCIP ports.
To set a port offline:
1. Navigate to the ports Summary screen.
2. Right-click the port you want to set offline then select Set Offline in the menu list.
The Set Offline dialog box appears.
3. Click Yes.
Initializing a Port
NOTE: This operation can only be performed on Fibre Channel and RCFC ports.
To initialize a port:
1. Navigate to the ports Summary screen.
2. Right-click the port you want to initialize then select Initialize in the menu list.
The Initialize Port dialog box appears.
3. Click Yes.
Synchronizing a Port with the Name Server
NOTE: This operation can only be performed on Fibre Channel and RCFC ports.
To synchronize a port with the name server:
1. Navigate to the ports Summary screen.
2. Right-click the port you want to synchronize then select Name Server Sync in the menu list.
The Name Server Sync dialog box appears.
3. Click Yes.
Issuing an LIP Command
NOTE: This operation can only be performed on Fibre Channel and RCFC ports.
To issue an LIP (Loop Initialization Primitive) command:
1. Navigate to the ports Summary screen.
2. Right-click the port on which you want to issue the LIP command, then select Issue LIP in the
menu list.
The Issue LIP dialog box appears.
3. Click Yes.
Enabling a Remote Copy Interface
NOTE: This operation can only be performed on RCIP ports.
To enable a Remote Copy interface:
1. Navigate to the ports Summary screen.
Setting a Port Offline 31