HP 3PAR Management Console 4.5.1 Software User Guide
2. Right-click the disabled Remote Copy port you want to enable then select Enable Interface in
the menu list.
The Enable Interface dialog box appears.
3. Click Yes.
Disabling a Remote Copy Interface
NOTE: This operation can only be performed on RCIP ports.
To disable a Remote Copy interface:
1. Navigate to the ports Summary screen.
2. Right-click the Remote Copy port you want to disable, then select Disable Interface in the menu
list.
The Disable Interface dialog box appears.
3. Click Yes.
Pinging a Port
To ping an iSCSI or RCIP port:
1. Navigate to the ports Summary screen.
2. Right-click the iSCSI or RCIP port you want to ping then select Ping in the menu list.
The Ping Port dialog appears.
3. In the General group box, enter the following:
a. System - Select a system from the list.
b. Port - Select the port from which you are initiating the ping.
c. Destination IP Address - Enter the destination port's IP address.
d. Count - The number of times (iSCSI: from 1 to 64, RCIP: from 1 to 25) to ping the specified
IP address.
e. Wait Time - Enter the wait time in seconds (5 to 30) for each ping. (For RCIP ports only.)
f. Packet Size - Enter the number of packets (1 to 65,507) to send with each ping. (For RCIP
ports only.)
g. (Optional) Select Prevent fragmentation of packets. (For RCIP ports only.)
4. Click Ping.
The results of the ping operation appears in the Result group box.
Viewing System Ports
The system Ports screen provides information about all system ports.
To access the system Ports screen:
1. Select Systems in the Manager Pane.
2. In the Management Tree, select Ports under the system with the port information you want to
view.
The system Ports screen provides the following tabs, depending on the types of ports supported by
the selected system: Summary, CNA, Fibre Channel, RCFC, iSCSI, RCIP, SAS, and Alerts. Refer to
the following sections for more information:
“Viewing Port Summary Information” (page 33)
“Viewing the Port Details Summary Tab” (page 34)
“Viewing CNA Ports” (page 41)
“Viewing System Fibre Channel Ports” (page 43)
32 Managing Ports