HP 3PAR Management Console 4.5.1 Software User Guide

The following information for DC2 and DC4 drive cages is provided:
DescriptionColumn
The interface card name.Name
Four ports for each FC-AL. For FC-AL A, that is A0 through A3, and for FC-AL B,
that is B0 through B3.
Ports
The status of Link A's Fibre Channel receiver of the SFP. Green if receiving signal;
off if not receiving signal.
Link A RX LED
The status of Link A's SFP transmitter. Green if sending signal; off if not sending
signal.
Link A TX LED
The status of Link B's Fibre Channel receiver of the SFP. Green if receiving signal;
off if not receiving signal.
Link B RX LED
The status of Link B's SFP transmitter. Green if sending signal; off if not sending
signal.
Link B TX LED
The system status.System LED
Link A speed.Link A Speed
Link B speed.Link B Speed
The state of Link A's SFP.Link A SFP State
The state of Link B's SFP.Link B SFP State
The following information for DC3 drive cages is provided:
DescriptionColumn
The interface card name.Name
Four ports for each FC-AL. For FC-AL A, that is A0 through A3, and for FC-AL B,
that is B0 through B3.
Ports
Current state of port 0.Port 0 State
Current state of port 1.Port 1 State
Current state of port 2.Port 2 State
Current state of port 3.Port 3 State
Link speed for port 0.Port 0 Link Speed
Link speed for port 1.Port 1 Link Speed
Link speed for port 2.Port 2 Link Speed
Link speed for port 3.Port 3 Link Speed
Drive cage firmware status (Current, Not Current, Unknown).Firmware State
Current state of the interface card.State
The current state of the Enhanced Switch Hub.ESH State
330 Managing Drive Cages