HP 3PAR Management Console 4.5.1 Software User Guide

The following information is displayed:
DescriptionColumn
Position of the drive magazine within the drive cage.Position
The current stage of the drive cage.State (for DCS1 and DCS2 drive cages)
The current state of the drive magazine. See “System and Component
Status Icons” (page 507).
Status LED (for DC2 and DC4 drive cages)
The current state of the hot plug LED.Hot Plug LED
(for DC2 and DC4 drive cages)
Number of disks in the drive magazine.Disks
Status of the Interface Card loop (A) to the node.Loop A State
Status of the Interface Card loop (B) to the node.Loop B State
Viewing Drive Cage Physical Disks Details
To view physical disk details:
1. Navigate to the Drive Cages screen.
2. In the list pane of the Drive Cages screen, click the Summary tab and select a drive cage.
3. In the detail pane, click the Physical Disks tab.
The Physical Disks tab appears as follows (the following depicts information for a DC2 drive cage.
Your screen might differ depending on the drive cage type in your system):
332 Managing Drive Cages