HP 3PAR Management Console 4.5.1 Software User Guide

DescriptionColumn
Number of unused chunklets that have failed.Normal Unused Failed
Number of chunklets used for sparing.Spare Used OK
Number of spare chunklets that have failed.Spare Used Failed
Number of initialized but currently unused chunklets available for use for sparing.Spare Unused Free
Number of spare chunklets being cleaned.Spare Unused Uninit
Number of unused spare chunklets that have failed.Spare Unused Failed
The World Wide Name assigned to the disk.WWN
The name of the disk manufacturer.Manufacturer
The model name of the disk.Model
The serial number of the disk.Serial Number
The firmware version used by the disk.Firmware Version
The number of correctable read errors.Correctable Read Errors
The number of uncorrectable read errors.Uncorrectable Read Errors
The number of correctable write errors.Correctable Write Errors
The number of uncorrectable write errors.Uncorrectable Write Errors
The current temperature of the drive.Temperature
Disk path A (in Node:Slot:Port format).Path A
Disk path B (in Node:Slot:Port format).Path B
The state of path A.A State
The state of path B.B State
Primary path order.Order
Media type of as SSD device, such as Magnetic or Single-Level Cell (MLC or
SLC).
Media Type
The estimated remaining life of an SSD, as a percentage. The threshold limit is
95%. If the remaining life exceeds the threshold (that is, 5% or less life remaining),
the bar changes from green to red.
Life Remaining
NOTE: SSDs have a limited number of writes that can occur before reaching
the SSD's write endurance limit. This limit is generally high enough so wear out
will not occur during the expected service life of an HP 3PAR StoreServ under
the great majority of configurations, IO patterns, and workloads. HP 3PAR
StoreServ tracks all writes to SSDs and can report the percent of the total write
endurance limit that has been used. This allows any SSD approaching the write
endurance limit to be proactively replaced before they are automatically spared
out. An SSD has reached the maximum usage limit once it exceeds its write
endurance limit. Following the product warranty period, SSDs that have exceeded
the maximum usage limit will not be repaired or replaced under HP support
contracts.
The manufacturer’s stated capacity of the disk.Manufacturer Capacity
Displaying Capacity Information
To view physical disk capacity information, select Capacity from the filtering list.
Displaying Capacity Information 341