HP 3PAR Management Console 4.5.1 Software User Guide

DescriptionColumn
Number of spare chunklets being cleaned. A chunklet that is clean has been
set to all zeros, and therefore does not contain any data.
Spare Unused Uninit
Number of uninitialized chunklets reserved as spares but currently unusable
because they have failed.
Spare Unused Failed
Displaying Inventory Information
To view physical disk inventory information, select Inventory from the filtering list.
The following information is displayed:
DescriptionColumn
Physical disk ID, as assigned by the system. Physical disks are numbered
contiguously during system installation beginning with 0.
ID
The drive cage in which the disk is located.Cage
A description of the physical location of the drive cage.Cage Location
Location of the disk in Cage:Magazine:Disk format.Position
Indicates whether a physical disk is a Fast Class (FC), Nearline (NL), or Solid
State (SSD) drive.
Device Type
The protocol used by the device, for example, FC or SAS.Device Protocol
Speed of the specified disk (in thousands of RPMs).Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives without spinning media (SSDs).
It is meant as a rough estimation of the performance difference between the drive and the other drives in the system.
For FC and NL drives, the number corresponds to both a performance measure and actual rotational speed. For an
SSD drive, the number is to be treated as relative performance benchmark that takes into account in I/O per second,
bandwidth, and the access time.
State of the disk as identified by the kernel.State
The World Wide Name assigned to the disk.WWN
Name of the disk manufacturer (for example, SEAGATE).Manufacturer
Disk model number.Model
Disk manufacturer's serial number.Serial Number
Disk manufacturer's firmware revision tracking string.Firmware Version
344 Managing Physical Disks