HP 3PAR Management Console 4.5.1 Software User Guide

The following information is displayed:
DescriptionColumn
Physical disk ID, as assigned by the system. Physical disks are numbered contiguously
during system installation beginning with 0.
PD ID
Chunklet ID, which indicates the location of the chunklet on the physical disk. Chunklets
are numbered contiguously beginning with 0
PD Chunklet
Name of the logical disk that is using the spare chunklet.LD Name
The position of the chunklet in the logical disk.LD Chunklet
State of the chunklet as identified by the kernel. See “System and Component Status
Icons” (page 507).
State
Indicates whether the chunklet is reserved by a logical disk or available for use.Usage
Current status of the physical disk media for the chunklet (Valid or Failed).Media
The spare status of the chunklet. Yes indicates the chunklet is reserved as a spare and
No indicates a free chunklet that has been selected by the system as a spare.
User Reserved
Clean status of the chunklet. Yes indicates that the chunklet is free of data and ready
for use. No indicates that it is currently in use, and Cleaning denotes that the chunklet
is being cleaned of all data (reset to all zeros).
Clean
Location of the chunklet prior to relocation, expressed as <PD ID> : <chunklet ID>.Initial Location
The destination of the chunklet during relocation, expressed as <PD ID> : <chunklet
ID>.
Destination
Viewing the Physical Disks Alerts Tab
To view the physical disks Alerts tab:
1. Navigate to the Physical Disks screen.
2. Click the Alerts tab.
The Alerts tab displays physical disk-related alerts for the system. The information displayed in the
physical disks Alerts tab is identical to the information contained in the systems Alerts tab.
The Alerts tab displays only physical disk-related alerts.
See “Viewing System Alerts” (page 291).
348 Managing Physical Disks