HP 3PAR Management Console 4.5.1 Software User Guide

3. Select a Sampling Resolution:
• High (Every 5 minutes) – The report is created by using a 5-minute sampling interval.
• Medium (Hourly) – The report is created using hourly data stored in a database within
the storage system.
• Low (Daily) – The report is created using daily data stored in a database within the storage
system.
4. For a Values over a Time Interval chart type:
a. In the Time Interval group box, select a Start Time and End Time. If you keep the default
end time as the current date and time, you can select the start time to be a specific number
of hours prior to the end time. You also have the option to select a specific date and time
for both the start and end times, see “Time Interval Group Box” (page 444).
b. In the Show Values for Types group box, select the checkboxes for any of the Device
Types listed for which you want to display values. At least one Device Type must be
selected.
The following disk types are allowed: FC, NL, and SSD.
c. In the Physical Disks group box, select the All radio button to include values for all physical
disks, or select the Filter radio button, then click the Select Objects button to specify the
physical disks to include. If you have selected specific physical disks, the Selected radio
button is automatically selected. For information on how to select physical disks, see
“System Reporter Filter Dialog” (page 443).
d. In the Show Charts group box, select the checkboxes for one or more charts to display:
PD Normal Space or PD Spare Space. At least one chart type must be selected.
5. For a Values at a Specified Time chart type:
a. In the Point in Time or Date and Time group box, select the Current date and time radio
button, or click the icon to select a date and time. If you have selected a specific date
and time, the Selected date and time radio button is automatically selected.
b. In the Show Values for Types group box, select the checkboxes for any of the Device
Types listed for which you want to display values. At least one Device Type must be
selected.
The following device types are allowed: FC, NL, and SSD.
c. In the Physical Disks group box, select the All radio button to include values for all physical
disks, or select the Filter radio button, then click the Select Objects button to specify the
physical disks to include. If you have selected specific physical disks, the Selected radio
button is automatically selected. For information on how to select physical disks, see
“System Reporter Filter Dialog” (page 443).
d. In the Group Values group box, select the attributes you want to use to group chart values.
At least one group type must be selected.
You can group chart reports by one or more of the following attributes: PD ID (default),
Cage ID, Cage Size, Magazine, Device, Device Type and Speed.
e. In the Show Charts group box, select the checkboxes for one or more charts to display:
PD Normal Space and PD Spare Space. At least one chart type must be selected.
6. Click Next to go to the Summary page, or click Finish to complete the wizard.
Summary
Review your settings, then click Finish to complete the wizard.
Creating Reports 387