HP 3PAR Management Console 4.5.1 Software User Guide

DescriptionFieldGroup
The manufacturer's recommended lower-limit alarm level.Low Alarm Threshold
The manufacturer's recommended upper-limit alarm level.High Alarm Threshold
Sessions Tab
For iSCSI ports, session information is displayed on the Sessions tab.
The following information is provided:
DescriptionColumn
Location of the iSCSI port in Node:Slot:Port format.Position
IP address of the host that initiated the connection.IP Address
Identifier for the Target Session Identifying Handle (TSIH).TSIH
iSCSI name for the associated iSCSI host path.iSCSI
Number of connections for this session.Connection Count
Time the session started.Start Time
Hosts Tab
The host port information is displayed on the Hosts tab. Information differs for Fibre Channel and
iSCSI ports.
The following information is provided for Fibre Channel ports:
DescriptionColumn
The ID of the host.Host ID
The name of the host.Host Name
The domain in which the host is located.Domain
The host's WWN.WWN
The hosts location in N:S:P (Node:Slot:Port) format.Port
The following information is provided for iSCSI ports:
DescriptionColumn
The ID of the host.Host ID
The name of the host.Host Name
The domain in which the host is located.Domain
iSCSI name for the associated iSCSI host path.iSCSI
iSCSI port IP address.IP Address
Viewing CNA Ports
To view CNA port information:
1. Navigate to the Ports screen.
Viewing System Ports 41