HP 3PAR Management Console 4.5.1 Software User Guide

3. Select a Sampling Resolution:
• High (Every 5 minutes) – The report is created by using a 5-minute sampling interval.
• Medium (Hourly) – The report is created using hourly data stored in a database within
the storage system.
• Low (Daily) – The report is created using daily data stored in a database within the storage
system.
4. For a Values over a Time Interval chart type:
a. In the Time Interval group box, select a Start Time and End Time. If you keep the default
end time as the current date and time, you can select the start time to be a specific number
of hours prior to the end time. You also have the option to select a specific date and time
for both the start and end times, see “Time Interval Group Box” (page 444).
b. In the Show Values for Types group box, select the checkboxes for any of the Device
Types and RAID Types listed for which you want to display values. At least one device
type and one RAID type must be selected.
The following device types are allowed: FC, NL, and SSD
The following RAID types are allowed: RAID 0, RAID 1, RAID 5, and RAID 6.
c. In the Include values for the following group box, select the All radio button to include
values for all logical disks, or select the Filter radio button, then click the Select Objects
button to specify the logical disks to include. If you have selected specific logical disks,
Creating Reports 437