HP 3PAR Management Console 4.5.1 Software User Guide

DescriptionColumn
The partner port.Partner
The WWN of the partner port.Partner WWN
Indicates if the system is in a failover state.Failover State
When Settings is selected, the following information is displayed:
DescriptionColumn
The port location in Node:Slot:Port format.Position
The type of port connection. Disk, Host, Peer, or RCFC.Connection Mode
Type of connection (Private Loop, Public Loop, or Point-Point).Connection Type
Data transfer rate setting in Gbps (for example, 1 Gbps). Auto indicates that the system
automatically selects the rate.
Configured Rate (Gbps)
Maximum rate of connection from the port, in Gbps.Max Rate (Gbps)
Indicates whether Class2 service is enabled or disabled.Class2
For fabric attached ports, indicates the VLUN change notification setting. When set to
Enabled, notices are generated and sent to the fabric controller. When set to Disabled,
no notification is sent.
VCN
Indicates whether Unique Node WWN is enabled or disabled.Unique Node WWN
If Disabled, each I/O generates a separate interrupt to the HBA port driver rather than
generating one interrupt for multiple I/O completion. Not available for systems running
HP 3PAR OS 2.2.4 or earlier.
Interrupt Coalesce
Detail Pane
The detail pane provides detail information about a selected Fibre Channel port from the list pane.
If the Fibre Channel port is connected to disks, information is displayed on a Summary tab, a
Physical Disks tab, and an SFP tab. If the Fibre Channel port is connected to hosts, information is
presented on a Summary tab, a Hosts tab, and an SFP tab. Each are discussed in detail in the
following sections:
“Fibre Channel Summary Tab” (page 44)
“Physical Disks Tab” (page 46)
“SFP Tab” (page 50)
“Hosts Tab” (page 47)
Fibre Channel Summary Tab
The Fibre Channel summary is displayed on the Summary tab.
The following information is provided:
DescriptionFieldGroup
The port location in Node:Slot:Port format.PositionGeneral
The designated port label.Label
Port World Wide Name.Port WWN
Node World Wide Name.Node WWN
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.Type
44 Managing Ports