HP 3PAR Management Console 4.5.1 Software User Guide

31 Viewing the Hardware Inventory Summary Tab
The Hardware Inventory Summary tab provides quick summary information about hardware used
in all connected HP 3PAR StoreServ Storage Systems.
To access the Hardware Inventory Summary tab;
1. Select Hardware Inventory in the “Manager Pane” (page 495).
2. In the “Management Tree” (page 494), select the Storage Systems node.
The Hardware Inventory Summary tab appears in the “Management Window” (page 503).
NOTE: The Hardware Inventory Summary tab is only available if the Storage Systems node is
selected in the Management Tree.
The Hardware Inventory Summary tab can be filtered by Summary and Descriptor information.
The Summary filter provides the following information:
DescriptionColumn
The system name.System Name
The system serial number.System SN
The system model type.Model
The number of controller nodes in the system.Nodes
The number of adapter cards in the system.Adapter Cards
The number of drive cages in the system.Cages
The number of drive magazines in the system.Magazines
The number of disk drives in the system.Disks
The Descriptors filter displays the following information:
DescriptionColumn
The system name. Each name displayed is a link to that system's summary information.Name
The system serial number.System SN
The system model number.Model
The physical location of the system (if entered during system setup).Location
The owner of the system (if entered during system setup).Owner
469