HP 3PAR Management Console 4.5.1 Software User Guide

32 Viewing the Node Subsystems Tab
The Hardware Inventory Node Subsystems tab provides information about controller node
components. The information is included on eight additional tabs, which are discussed in the
following sections:
“Viewing the Node Subsystems Controller Nodes Tab” (page 471)
“Viewing the Node Subsystems CPUs Tab” (page 472)
“Viewing the Node Subsystems Internal Drives Tab” (page 473)
“Viewing the Node Subsystems Physical Memory Tab” (page 473)
“Viewing the Node Subsystems Adapter Cards Tab” (page 474)
“Viewing the Node Subsystems SFPs Tab” (page 475)
“Viewing the Node Subsystems Power Supplies Tab” (page 476)
“Viewing the Node Subsystems Batteries Tab” (page 477)
To access the Hardware Inventory Node Subsystems tab:
1. Select Hardware Inventory in the Manager Pane.
2. In the Management Tree, select the Storage Systems node, or select a specific system node
(for example, s424).
3. In the Management Window, click the Node Subsystems tab.
Viewing the Node Subsystems Controller Nodes Tab
The Node Subsystems Controller Nodes tab displays information about the system's controller node
pairs.
To access the Node Subsystems Controller Nodes tab, select the Controller Nodes tab after accessing
the Node Subsystem tab.
1. Select Hardware Inventory in the Manager Pane.
2. In the Management Tree, select the Storage Systems node, or select a specific system node
(for example, s424).
3. In the Management Window, click the Controller Nodes tab.
The Node Subsystems Controller Nodes tab displays the following information:
DescriptionColumn
The name of the storage system.System*
The controller node name.Name
Viewing the Node Subsystems Controller Nodes Tab 471