HP 3PAR Management Console 4.5.1 Software User Guide
iSCSI Settings
1. In the iSCSI Host Paths group box:
a. Select one or more iSCSI names from the Available iSCSI Names list. This list displays
iSCSI names for all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected iSCSI name(s) to the Assigned iSCSI Names list.
c. To assign new iSCSI names, enter the iSCSI name(s) in the New iSCSI Name text box and
click Assign.
NOTE: Rules for the CHAP group box in the following step are as follows:
• When selecting the Initiator CHAP checkbox, CHAP Name is initialized with the host
name (default).
• The Target CHAP checkbox is enabled when the Initiator CHAP checkbox is selected.
• The CHAP Secret text box is required if a CHAP Name is entered.
• Target CHAP is optional.
• Target CHAP can only be populated if Initiator CHAP is populated.
2. In the CHAP group box:
a. Select the Initiator CHAP checkbox. The CHAP Name text box displays the host name.
b. Enter a secret/password in the CHAP Secret text box.
c. If the CHAP Secret text box is entered in hexadecimal, select the Hex checkbox.
d. If required, select the Target CHAP checkbox. The CHAP Name text box displays the
system name.
e. Enter a secret/password in the CHAP Secret text box.
3. Click Next to view summary information, or click Finish to close the wizard and configure the
host.
Summary
Review the summary information, then click Finish.
Editing Hosts
To edit a host, access the Edit Host wizard:
1. Select Hosts in the Manager Pane.
2. In the Management Tree, select Hosts under the system where the host you want to edit is
located.
3. Click the Hosts tab in the Hosts screen.
4. Right-click the host you want to edit, then select Edit Host in the menu list.
The Edit Host wizard appears.
Host Settings
1. In the General group box:
a. Name - Enter a new host name.
b. Host OS - Select the operating system running on the host.
c. Persona - The host persona is visible and disabled. When Host OS is selected, the
corresponding persona is selected for the user, and the Operating System descriptor field
is filled with the Host OS automatically.
2. (Optional) In the Descriptors group box, edit the description information as desired in the
Location, IP Address, Operating System, Model, Contact, and Comments fields.
3. Click Next, or click Finish to close the wizard and edit the host with the information entered.
96 Managing Hosts