HP 3PAR Online Import for EMC Storage Data Migration Guide
Identify the Source Storage System
To identify the source storage system:
1. From the HP 3PAR Online Import Utility execute the addsource command.
NOTE: Use your local host username and password credentials.
Example 18 addsource command
>addsource -type VNX -mgmtip 10.10.10.10 -user admin -password 1Password -uid
50067890C6E059EE
>SUCCESS: Added source storage system
2. Enter the showsource command to verify the source storage system information.
Example 19 showsource command
>showsource –type VNX
NAME TYPE UNIQUE_ID FIRMWARE MANAGEMENT_SERVER OPERATIONAL_STATE
CLARiiON+APM00125345014 VNX 50067890BEE0177F 05.32.000.5.201 10.10.10.10 Good
Identify the Destination Storage System
To identify the destination procedure:
1. From the HP 3PAR Online Import Utility execute the adddestination command.
Example 20 adddestination command
>adddestination –type 3PAR –mgmtip 10.10.10.10 –user 3paradm –password 2Password
>SUCCESS: Added destination storage system
2. Enter the showdestination to verify the destination storage system information.
Example 21 showdestination command
>showdestination –type 3PAR
Identifying the Source and Destination Storage System 41