HP 3PAR Online Import for EMC Storage Data Migration Guide

Example 23 showmigration command
>showmigration -migrationid 1395864499741
MIGRATION_ID TYPE SOURCE_NAME DESTINATION_NAME START_TIME END_TIME
STATUS(PROGRESS)(MESSAGE)
1395864499741 offline CLARiiON+APM00123452867 3par_7200_DCA_01 Wed Mar 26 13:08:19 PDT
2014 -NA- preparationcomplete(100%)(-NA-)
3. Enter the showmigrationdetails command to verify the volumes being migrated. In the
preparation stage the progress for each volume will be 0%.
Example 24 showmigrationdetails command
>showmigrationdetails -migrationid 1395864499741
SOURCE_VOLUME DESTINATION_VOLUME TASK_ID PROGRESS
OIU_Test_Lun_01 OIU_Test_Lun_01 |unknown| 0%
Start the Data Migration from Destination to HP 3PAR StoreServ Storage
System
1. From the HP 3PAR Online Import Utility, execute the startmigration command.
Example 25 startmigration command
>startmigration –migrationid 1122334456
>SUCCESS: Data transfer started successfully
2. To view the status of the migration, execute the showmigration command.
Example 26 showmigration command
>showmigration -migrationid 1396643904320
MIGRATION_ID TYPE SOURCE_NAME DESTINATION_NAME START_TIME
END_TIME STATUS(PROGRESS)(MESSAGE)
1396643904320 MDM CLARiiON+APM00125127014 3par_7200_DCB_01 Fri Apr 04 16:38:24 EDT 2014 -NA-
unpresenting(1%)(-NA-)
TIP: The final status on successful completion will indicate “success”.
Post Migration Tasks
1. On successful completion of migration, communication from host to source EMC Storage
system is severed by removing host to source zone.
2. Restart the host.
3. Remove the EMC PowerPath Multipath software and configure native multipath software. For
additional information, see “Update Host Multipath Software and Unzone from Source EMC
Storage System” (page 33).
Start the Data Migration from Destination to HP 3PAR StoreServ Storage System 43