HP 3PAR Online Import for EMC Storage Data Migration Guide

display (columns). Accepts a
comma separated list of column
names.
This is serial number or WWN
or hyphenated WWN.
Optionalunique_id
List of host ports hyphenated
64 bit WWN (N:S:P). Peer will
be marked as peer.
Optionalpeer_ports
Displays the list of column
names applicable to that
command.
Optionallistcols
Firmware version.Optionalfirmware
The IP address/FQDN of the
management server that
manages this storage system.
Optionalmanagement_server
Operational state of the
storage system (Good, Failed,
Attention).
Optionaloperational_state
EXAMPLES
showdestination
NAME TYPE UNIQUE_ID FIRMWARE MANAGEMENT_SERVER OPERATIONAL_STATE PEER_PORTS
DMMT3PAR02 3PAR 2FF70002AC003F9C 3.1.3 15.218.169.236 Normal
2211-0202-AC00-3F9C(2:1:1) 2311-0202-AC00-3F9C(3:1:1)
showmigration
Lists migrations.
DESCRIPTION
The showmigration command lists active migrations in preparation or data transfer phase as
well as the ones that are successful or aborted. By default all migrations are listed. Status of a
migration will show the current state as well as the progress percentage whenever applicable and
failure reason whenever applicable
PARAMETERS
DescriptionMandatory/optionalParameter
Online/MDM/Offline. Display
all migrations that are of the
type specified.
Optionaltype
Displays migrations that are in
the specified state.
Optionalstatus
Unique number that identifies
a migration after
Optionalmigrationid
createmigration is
complete. If this is specified,
there is no need to provide
source & destination details.
This command can be used to
print delimited output.
Optionalcsvtable
showmigration 67