HP 3PAR OS 3.1.3 Command Line Interface Reference

dismissrcopylink
DESCRIPTION
The dismissrcopylink command removes one or more links (connections) created with the
admitrcopylink command to a target system.
SYNTAX
• Syntax for remote copy over IP (RCIP):
dismissrcopylink <target_name> <node:slot:port:IP_address>...
• Syntax for remote copy over Fibre Channel (RCFC):
dismissrcopylink <target_name> <node:slot:port:WWN>...
AUTHORITY
• Super, Edit
• Any role that is granted the rccopylink_dismiss right.
NOTE: You must have access to all domains to run this command.
OPTIONS
None
SPECIFIERS
<target_name>
The target name, as specified with the creatercopytarget command.
<node:slot:port:IP_address>...
Specifies the node, slot, and port of the Ethernet port on the local system and an IP address of the
peer port on the target system. This specifier can be repeated.
<node:slot:port:WWN>...
Specifies the node, slot, and port of the Fibre Channel port on the local system and a World Wide
Name (WWN) of the peer port on the target system. This specifier can be repeated.
RESTRICTIONS
• This command requires an HP 3PAR Remote Copy Software license. Contact your local service
provider for more information.
• This command should only be used to remove sending links.
• This command cannot be used to remove the last link of a target system with started groups.
EXAMPLES
The following example removes the link from the Ethernet port located at 2:2:2 of System 2:
# dismissrcopylink System2 2:2:2:193.1.2.11
dismissrcopylink 155