HP 3PAR OS 3.1.3 Command Line Interface Reference

1
You need access to all domains in order to run this command.
Health and Alert Management Commands
Alerts
For Details SeeAuthorityDescriptionCommand
“removealert” (page 213)Super, Service
1
Any role granted the
alert_remove right.
Removes one or more alerts.removealert
“setalert” (page 259)Super, Service
1
Any role granted the
alert_set right.
Sets the status of system
alerts.
setalert
“showalert” (page 339)Any role in the system.Displays system alerts.showalert
1
You need access to all domains in order to run this command.
Alert Severity Levels
Table 2 Alert Severity Levels
DescriptionSeverity
A fatal event has occurred. It is no longer possible to take remedial action.Fatal
The event is critical and requires immediate action.Critical
The event requires immediate action.Major
An event has occurred that requires action, but the situation is not yet serious.Minor
An aspect of performance or availability may have become degraded. You must decide if action
is necessary.
Degraded
The event is informational. No action is required other than acknowledging or removing the alert.Informational
Events
For Details SeeAuthorityDescriptionCommand
“showeventlog” (page 372)Any role in the system.Displays event logs.showeventlog
System Health
For Details SeeAuthorityDescriptionCommand
“checkhealth” (page 58)Super, Service
Any role granted the
health_check right.
Displays the status of the
system hardware and
software components.
checkhealth
Health and Alert Management Commands 21